How to Caulk and Weatherstrip

Caulking and weatherstripping close the gaps where air and water sneak into your home. Caulk seals joints that don't move, like the seam around a bathtub or window trim; weatherstripping seals the parts that open and close, like doors and window sashes. Find the gaps first, choose a product labeled for that spot, and work on a dry, clean surface.
These are some of the most useful small jobs in our DIY & Repairs section, and they pair well with a seasonal maintenance routine.
Step 1: Find the drafts and gaps
Look and feel around these areas on a cool, breezy day:
- Door edges and the threshold
- Window sashes and the frames around them
- Window and door trim, inside and outside
- Where pipes, vents and cables pass through walls
- Baseboards on exterior walls
- Around tubs, showers, sinks and backsplashes
Ways to find drafts:
- Hold the back of a damp hand near the edge and feel for cool air.
- Hold a thin strip of tissue near gaps and watch for movement.
- At night, have someone shine a flashlight around the outside of a door while you look for light from inside.
- Close a door on a sheet of paper. If it slides out easily, the seal may be worn.
Skip candles, lighters and incense for this. A damp hand works just as well without the fire risk.
Step 2: Choose the right caulk
Caulk types vary, and the label is your best guide. In general terms:
| Caulk type | Typical use | Notes |
|---|---|---|
| Acrylic latex | Interior trim, baseboards, drywall gaps | Paintable; cleans up with water |
| Siliconized acrylic | Interior trim and some damp areas | Paintable versions available |
| 100% silicone | Tubs, showers, sinks, wet areas | Flexible and water-resistant; usually not paintable |
| Exterior or elastomeric | Siding, exterior trim, around windows outside | Made to handle weather and movement |
Look for "kitchen and bath" or "mildew-resistant" on caulk for wet rooms. Check whether it can be painted, and follow the label for temperature, drying and cure time.
Step 3: Remove old caulk
New caulk won't stick well to old caulk, dirt or soap film.
- Put on gloves and safety glasses.
- Cut along both edges of the old bead with a utility knife or caulk removal tool.
- Pull and scrape out the old caulk with a putty knife or plastic scraper.
- Clean the joint with a mild cleaner, following its label, then rinse.
- Let it dry completely. In a bathroom, that can mean a day with the fan running.
If you find dark spots under the old caulk, that's often mold or mildew. Our guide to mold and mildew explains how moisture control comes first, how to clean small areas and when a bigger problem needs a professional.
Older windows: if your home was built before 1978, old window paint and glazing may contain lead. Don't scrape or sand painted surfaces until you've tested; our guide to painting a room explains lead safety.
Step 4: Run a clean bead
- Cut the caulk tube tip at an angle with a small opening; you can always cut more.
- Load the tube in a caulk gun and puncture the inner seal if needed.
- Apply painter's tape on both sides of the joint for a crisp line (optional but helpful).
- Hold the gun at a steady angle and squeeze while moving smoothly along the joint.
- Smooth the bead with a wet fingertip (wear a glove) or a caulk smoothing tool.
- Pull the tape while the caulk is still wet.
- Let it cure for the time on the label before getting it wet or painting.
For tubs, some people fill the tub with water before caulking so the joint is at its widest, then drain it after the caulk cures. Check the caulk label for any guidance on this.
Step 5: Weatherstrip doors and windows
| Weatherstrip type | Where it works | Notes |
|---|---|---|
| Adhesive foam tape | Window sashes, door stops | Easy to install; replace as it compresses |
| V-strip (tension seal) | Sides of double-hung windows, door jambs | Folds into a V to seal the gap |
| Door sweep | Bottom of a door | Screws or sticks to the door face |
| Tubular rubber or vinyl | Door jambs | Durable; usually tacked or screwed on |
To install:
- Clean and dry the surface.
- Measure carefully and cut the strip to length.
- Apply it so the door or window presses lightly against it when closed.
- Close and test. The door should latch without forcing it.
Working outside safely
Exterior caulking around windows and trim often means a ladder. Set it on firm, level ground, keep a helper nearby to steady it, and don't overreach. Leave second-story and roof work to a professional, and don't caulk over gaps that look like rot or structural movement; have those checked first.
How this connects to other projects
Caulking is a finishing skill for woodworking, too. Filling small gaps before painting a shelf or trim piece gives a cleaner look, and our guide to woodworking for beginners covers the other tools worth learning. A paintable caulk also helps when you're finishing one of the easy woodworking projects, like a painted wall shelf. And if a bathroom caulking job is on your list, clearing a slow tub first with our steps to unclog a drain means you're not fighting standing water while you work.
A worked example: a drafty entry door
Example: Taylor, 40, feels cold air at the bottom of their front door. They close the door on a sheet of paper and it slides right out. They install a new door sweep and replace flattened foam on the door stop. The paper now drags when they pull it. They add "check weatherstripping" to their fall maintenance list.
Something to do this weekend
Do a draft hunt. Walk through your home with a damp hand and a notepad, checking each exterior door and window. Mark the worst spot, buy the matching weatherstripping or caulk, and seal it. One well-sealed door is a good start.
Want a step-by-step plan or guide?
Some people like the structure of a paid guide or set of plans. This button opens a third-party program from one of our advertising partners. Its claims are its own, not ours, so weigh them against our checklist for judging paid plans.
See the partner program →We may be paid when you click. The program shown can change. Read its terms before you buy anything. How this works
Frequently asked questions
What's the difference between caulk and weatherstripping?
Caulk seals gaps that don't move, like the joint between a tub and wall or window trim and siding. Weatherstripping seals parts that open and close, like doors and window sashes.
Which caulk should I use in a bathroom?
Choose a caulk labeled for kitchens and baths or wet areas, usually silicone or a siliconized product with mildew resistance. Read the label to confirm it suits your surface and whether it can be painted.
How long does caulk need to dry?
It depends on the product, temperature and humidity. Check the label for both the time before it can be touched and the full cure time before it gets wet, and keep the shower off until then.



